Nevion DWC-HD-DMUX - Manual (Page 8)

DWC-HD-DMUX Rev. F
nevion.com | 8
Supported standards
SD, 270 Mbps SMPTE 259M, SMPTE 272M-AC
HD, 1485 Mbps SMPTE 292M, SMPTE 274M, SMPTE 291M, SMPTE 296M,
SMPTE 299M
Analog video SMPTE 170M, SMPTE 274M, ITU-R. BT.470,
ITU-R. BT.709 Part 2
Centre of picture definition SMPTE RP187, ITU-R. BT.470
Aspect ratio preservation SMPTE RP199-1999, SMPTE RP221
Color space conversion HD: ITU-R. BT.709
SD: ITU-R. BT.601
See also ITU-R. BT.1361 for more information
Video switch point
definition and sync SMPTE RP168 (tri-level), SMPTE 170M, ITU-R. BT.470
AES AES3-1996
Optical SMPTE 297M, SMPTE 292M
EDH Compliant to SMPTE RP165
Video Payload
Identification SMPTE 352M-2002
Minimum video signal delay through processing
Input standards
Minimum delay [Field+Lines]
Full frame Cropped edge Letterbox (NTSC) Letterbox (PAL)
Regular input standards:
1920/1080i50
0+10 0+41 0+44
1920/1080i59.94 0+10 0+41 0+44
1280/720p50 0+10 0+41 0+44
1280/720p59.94 0+10 0+41 0+44
Progressive input with low frame rate:
1920/1080p25
1+10 1+41 1+44
1920/108p29.97 1+10 1+41 1+44
1280/720p25 1+10 1+41 1+44
1280/720p29.97 1+10 1+41 1+44
Input standards for telecine converters:
Minimum delay [Frame+Lines]
1920/1080p23.97 1+10 1+41 1+44
1280/720p23.97 1+10 1+41 1+44
Other
Power consumption 5V – 5.3W (4.9W without optical receiver)
15V
– 2.55W
-15V – 0.7W