Nevion ARC-SD-XMUX4 - Manual (Page 21)

ARC-SD-XMUX4 Rev. B
nevion.com | 21
ADLY Audio follows
video delay On: De-embedded audio
follows video. DIP 17-18 is
used
Off: De-embedded audio will
not use Frame delay from dip
17-18 If on, de-embedded audio
delay will follow video delay
OPT/EL OPT/EL Optical / Electrical input
SDO1PR
OC SDI OUT 1 Off: through mode
On: processed mode In through mode the video
only goes through a re-
clocker.
SDO2PR
OC SDI OUT 2 Off: through mode
On: processed mode In through mode the video
only goes through a re-
clocker.
F-RESET F-RESET Off: Use values preset by
MULTICON GYDA.
On: RESET to factory defaults This DIP is only read at
power up. After repowering
with the DIP off, the board
must be kept in the frame
for minimum 10s to fully
reset.
Values preset by
MULTICON GYDA, are only
values not set by DIPs,
push buttons or rotary
switches.
OVR OVR Off: MULTICON GYDA mode
On: Manual mode This DIP is only read at
power up.
OVR is short term for
MULTICON GYDA override
Table 1: DIP SWITCH FUNCTIONS