A.1 materials declaration, A.2 environmentally-friendly use period – Nevion AD6464M User Manual
Page 24
AD6464M / AD128128M
Rev. 7
nevion.com | 24
Appendix A Materials declaration and recycling information
A.1 Materials declaration
For product sold into China after 1st March 2007,
we comply with the “Administrative
Measure on the Control of Pollution by Electronic Information Products”. In the first stage of
this legislation, content of six hazardous materials has to be declared. The table below
shows the required information.
組成名稱
Part Name
Toxic or hazardous substances and elements
鉛
Lead
(Pb)
汞
Mercury
(Hg)
镉
Cadmium
(Cd)
六价铬
Hexavalent
Chromium
(Cr(VI))
多溴联苯
Polybrominated
biphenyls
(PBB)
多溴二苯醚
Polybrominated
diphenyl ethers
(PBDE)
FR-128128-AD
O
O
O
O
O
O
XC-AD-M6464
X
O
O
O
O
O
Multicon VX-MOD
O
O
O
O
O
O
GYDA-VX (option)
O
O
O
O
O
O
POWER-SM
O
O
O
O
O
O
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for
this part is below the limit requirement in SJ/T11363-2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous
materials used for this part is above the limit requirement in SJ/T11363-2006.
Parts without any of the above mentioned hazardous substances are indicated by the
product marking:
A.2 Environmentally-friendly use period
The manual must include a statement of the “environmentally friendly use period”. This is
defined as the period of normal use before any hazardous material is released to the
environment. The guidance on how the EFUP is to be calculated is not finalised at the time
of writing. See
for an
unofficial translation of the draft guidance. For our own products, Nevion has chosen to use
the 50 year figure recommended in this draft regulation.
Nevion suggests the following statement on An “Environmentally Friendly Use Period”
(EFUP) setting out normal use:
EFUP is the time the product can be used in normal service life without leaking the hazardous
materials. We expect the normal use environment to be in an equipment room at controlled
temperature range (0ºC - 40ºC) with moderate humidity (< 90%, non-condensing) and clean air, not
subject to vibration or shock.