2 specifications, 1 mechanics, 2 power supply – Nevion AD6464M User Manual
Page 5: 3 control
AD6464M / AD128128M
Rev. 7
nevion.com | 5
2 Specifications
2.1 Mechanics
Dimensions:
HxWxD = 220x483x340mm, (19”, 5RU).
Backplane card:
128x128 AES/EBU Digital Audio.
X-point Modules:
64x64 AES/EBU Digital Audio module cards.
System Controller:
1 Multicon VX-MOD
1
card required; 1 redundant card is
optional.
2.1.1 Emission/Immunity and Safety standards
Emission/Immunity standards: Compliant with CE EN55103-1 and 2, FCC part 15.
Safety standards:
Compliant with CE EN60950, UL-1950/CSA22.2.
2.2 Power Supply
Built-in, redundant power supply. 1 module included, 1 (redundant) optional.
Total power consumption:
<300W.
AC Supply voltage range:
90-130VAC / 180-254VAC, switchable, 50-60Hz, 300W.
AC Mains connector:
IEC 320, separate input for each PSU module.
Alarms:
Power failure alarm on relay contact closure, LED in front,
and Open Collector.
Alarms connector:
RJ45.
2.3 Control
Standard Features:
Serial ports:
RS-232/RS-422 for protocol conversion, to VikinX compact
control protocol, or to third party protocols.
(1x per Multicon VX-MOD card).
Connector:
DB9, female.
Ethernet ports:
10/100BaseT Ethernet bus for external router control with
new protocol. (1x per Multicon VX-MOD card).
Connector:
RJ45.
Monitored parameters:
(via Multicon VX-MOD)
Module temperature.
Internal module voltages.
Status surveillance:
On each card with LED, and via system controller.
Configuration storage:
Removable compact flash card.
Synchronization
2
handled
by Multicon VX-MOD:
Analog Black Burst, Looped. Both PAL and NTSC
supported.
Tri-Level, Looped. For HD signal formats only.
Connector:
BNC.
Other features:
SNMP agent, included with with Multicon VX-MOD
3
.
1
Syscon may be applied instead of Multicon VX-MOD in older installations.
2
Synchronization of an audio router is not necessary, but an available feature for users who intend to
switch this router synchronised to video, using video synchronization signals.