Niveo Professional NGS16TP - Manual (Page 101)

97
NIVEO PROFESSIONAL Gigabit Management Switch
User's Manual
6.4.7 VLAN
This switch supports 802.1Q VLAN, Port-based VLAN, and Private VLAN.
1). 802.1Q VLAN
1-1). 802.1Q VLAN
802.1Q VLAN : This is used to enable/disable 802.1Q VLAN function.
GVRP : The GVRP protocol can learn remote 802.1Q VLAN on other switches and add to
dynamic 802.1Q VLAN table. You can enable/disable the operation of this protocol.
Ingress Filter : This is used to enable/disable doing VLAN filtering function at ingress port.
If it is enable, the ingress port must be in the same VLAN for packet forwarding. If it is
disable, VLAN filtering function will be done at egress port.
[Frame Control]
This function could be used to drop non-802.1Q frames (untagged packets).
[Port VLAN ID Setting]
PVID is used to set Port VLAN ID. When untagged packet is received, PVID of the ingress
port will be used as the its VLAN ID. PVID is also used as the VLAN ID for tag adding
when untagged packet is translated to tagged packet.
1-2).VLAN Tag Rules