Niveo Professional NGS16TP - Manual (Page 66)

62
NIVEO PROFESSIONAL Gigabit Management Switch
User's Manual
11. show line command
This command is used to show current console line configuration.
show line console command is used to show current console line configuration.
# show line console
Password threshold: open-end time
Baudrate: 9600
Databits: 8
Parity : 0 [0|1|2|3][NONE|EVEN|ODD|MARK|SPACE]
Stopbits: 1
12. show log command
This command is used to show current system log and system log configuration.
# show log ?
configuration logging configuration
<cr>
show log command is used to show current system log content.
For example,
# show log
[5] Thu Jan 01 09:00:02 1970
Level: 4 System Started [port 0]
[4] Thu Jan 01 09:08:20 1970
Level: 4 Link down [port 8]
[3] Thu Jan 01 09:07:50 1970
Level: 4 Link up [port 8]
[2] Thu Jan 01 09:07:45 1970
Level: 4 Link down [port 8]
[1] Thu Jan 01 09:00:06 1970
Level: 4 System Started
show log configuration command is used to show current system log configuration.
For example,
# show log configuration
[System Log]
System Log Status : Enable
Log Level(0-7): 7
Remote Log : Disable
Remote Log Server IP : Empty
Remote Log Server IP : Empty
Remote Log Server IP : Empty
Remote Log Server IP : Empty
Remote Log Server IP : Empty
13. show mac-address-table command
This command is used to set Mac address table and configuration about it.