Niveo Professional NGS16TP - Manual (Page 86)

82
NIVEO PROFESSIONAL Gigabit Management Switch
User's Manual
This is used to setup the IP addresses that can manage this switch. They have different
access rights set in “Mode”. And the remote management interfaces (Http/Telnet/SNMP)
could be enable/disable for different administrators. This function is for security policy
of switch management.
Note: Remember to enable at least one IP/Subnet with Modify right for Http/
Telnet/SNMP interface. Otherwise, configuring switch from remote will become
impossible. In that case, you can manage the switch from console only.
2). Mac Security Configuration
There are two Mac ID security modes for the switch. One is Static Mac ID Filter on Port,
another is Dynamic Mac ID Number Limit on Port.
[ Static Mac ID Filter on Port ]