OWON HDS Series User Manual
Page 58
OWON HDS Series Handheld DSO & DMM
8-Advanced Function of Oscilloscope
CH2
Measure the
+Duty
of CH2
-Duty
CH1
CH2
Measure the
-Duty
of CH1
Measure the
-Duty
of CH2
DelayA B
CH1
CH2
Measure the
DelayA B
of CH1
Measure the
DelayA B
of CH2
DelayA B
CH1
CH2
Measure the
DelayA B
of CH1
Measure the
DelayA B
of CH2
To measure the frequency of CH1 with Measurement 1 and the peak-to-peak of CH2 with
Measurement 2, do the following:
1. Press
the
MENU key and the function menu is shown at the right of the screen.
2. Press
the
MENU ▲ or MENU ▼ key to select Measurement 1. Five options appear at the
bottom of the screen.
3. Press
the
F1 key to select the frequency measurement as CH1. The measurement window 1
on the screen turns into one red in color and shows the frequency of CH1.
4. Press
the
MENU ▲ or MENU ▼ key to select Measurement 2. Five options appear at the
bottom of the screen.
5. Press
the
F4 key to jump to the peak-to-peak measurement as CH2. The measurement
window on the screen turns into one blue in color and shows the peak-to-peak value of
CH2.
Now, you can see a screen that looks like the following figure 49.
figure 49: Automatic Measurements
Term interpretation
Vpp: Peak-to-Peak Voltage.
Vmax: The maximum amplitude. The most positive peak voltage measured over the
entire waveform.
Vmin: The minimum amplitude. The most negative peak voltage measured over the
entire waveform.
５０