OWON ODP Series - Manual (Page 15)

4.Quick Start
10
① ④ ② ③
⑧
⑩
⑨
⑦
⑥
Positive
(same layout as Negative)
⑤
Negative
Figure 4-5 User interface in Plus-minus mode
① Output status of Negative (same as Positive)
② Specified time and left time of current output when the timing output of
Negative is on
③ Actual output value of power for Negative
④ Timing output mode of Negative (Sequence / Loop, same as Positive)
⑤ Timer range of Negative (same as Positive)
⑥ The parameter number of the current output when the timing output of
Negative is on (same as Positive)
⑦ Set values of voltage and current for Negative
⑧ Actual output values of voltage and current for Negative
⑨ Status and set values of O.V.P and O.C.P for Negative in current status
⑩ Status icons, see "Status Icons" on P10 for more details
Status Icons
Icons Instruction
Connect as a slave device with PC
Recording the current output
A USB device is detected
Current working mode is Independent
Current working mode is Parallel