OWON ODP Series - Manual (Page 27)

5.Front Panel Operation
22
5.6.4 Set System Time
Press the System key and enter [System
→Sys Set →SysTime]. Press the ▲ / ▼ key or
turn the knob to set the selected value. Press the ＜ / ＞ key to move the cursor. Press
the key to confirm.
5.6.5 Buzzer
Press the System key and enter [System
→Sys Set →Buzzer]. Press the
key to turn
on/off the buzzer. When the buzzer is on, an icon will be shown on the status bar.
You will hear a key tone once a key is pressed down; when the system prompts the
instrument will make a buzzing sound, e.g. cutting off the output due to O.V.P/O.C.P.
When the buzzer is off, an icon will be shown on the status bar.
5.6.6 View System Information
Press the System key and enter [System
→SysInfo]. You can view the Serial Number,
Software Version and Hardware Version.
5.6.7 Set as Default
Press the System key and choose [System
→Default], press the
key to use the
factory defaults, see table below.
Working Mode
Parameter
Independent
Parallel Series
Plus-minus
CH 1 CH 2 Negative Positive
Normal
status
Voltage 5 V 5 V 12 V 15 V 12 V 12 V
Current 0.5 A 0.5 A 1 A 1.5 A 0.5 A 0.5 A
O.V.P value 5.5 V 5.5 V 12.5 V 15.5 V 12.5 V 12.5 V
O.C.P value 0.6 A 0.6 A 1.1 A 1.6 A 0.6 A 0.6 A
O.V.P/O.C.P status OFF OFF OFF OFF OFF OFF
Timer
status
O.V.P value 15 V 15 V 12 V 24 V 12 V 12 V
O.C.P value 1.5 A 1.5 A 1.5 A 1.5 A 0.5 A 0.5 A
O.V.P/O.C.P status OFF OFF OFF OFF OFF OFF
Menu Item Defaults
Brightness 9
Screen Saver OFF
Buzzer ON