OWON AG (-F) Series - Manual (Page 11)

4.Quick Start
6
⑨ CH2 Output Control Turn on/off the output of CH2. The backlight will be lighted
when CH2 is tuned on.
⑩ CH2 Output Output signal of CH2
⑪ Foot stool Make the instrument to be tilted for ease of operation
⑫ CH1 Output Control Turn on/off the output of CH1. The backlight will be lighted
when CH1 is tuned on.
⑬ CH1 Output Output signal of CH1
⑭ CH1/2 button Switch channel displayed on the screen between CH1 and
CH2.
⑮ Modulation (Mod) Generate the Modulated waveforms, Sweep and Burst; these
functions are only used for CH1.
⑯ Both button Display the editable parameters of both channels. When the
function is enabled, the backlight of the button turns on.
⑰ USB port Connect with an external USB device, such as connect a USB
device to the instrument.
⑱ Waveform selection
buttons
Include: Sine , Square , Ramp , Pulse ,
Noise and Arbitrary waveform. When a
waveform is selected, the backlight of the button turns on.
⑲ Power button Turn on/off the generator
Rear Panel
①
⑤ ④ ③
②
⑥ ⑦ ⑧
Figure 4-2 Rear panel overview