OWON AG (-F) Series - Manual (Page 43)

5.Front Panel Operation
38
To Set the Beep
(1)
Press Utility and choose System, enter the second page of the menu.
(2)
Press F1 to select Beep.
(3)
Press F1 to switch between On/Off. On is to activate the sound when the system
informs you. Off is to deactivate it.
View System Information
(1)
Press Utility and choose System, enter the second page of the menu.
(2)
Press F2 to select Sys info. You can view the Version and Serial number.
To Set the Clock Source
The waveform generator provides an internal clock source and also accepts external clock
source input from the [Ref Clk/Counter In] connector at the rear panel. It can also output
a clock source from the [Ref Clk Out] connector for other device to use.
Note:
The amplitude of the [Ref Clk/Counter In] input signal must be over 1 V.
(1)
Press Utility and choose System, enter the second page of the menu.
(2)
Press F3 to select CLK Sou.
(3)
Press F3 to switch between Internal/External.
To Use Built-in Help
(1)
Press Help function button, the catalog will display in the screen.
(2)
Press F1 or F2 to choose help topic, or just turn the knob to choose.
(3)
Press F3 to view the details about the topic; press F5 to go back to the
catalog.
(4)
Press Help again to exit the help, or just do other operations.