OWON AG (-F) Series - Manual (Page 12)

4.Quick Start
7
① Power socket AC input connector
② Fuse Use the specified fuse according to the voltage scale.
③ Power switch Switch between 110 V and 220 V.
④ USB (type B)
connector This can be used to connect a USB type B controller.
Connect with an external device, such as connected to a PC
and controlled via PC software.
⑤ Ext Mod In
Connector External modulation input, use it as external signal source.
⑥ Ext Trig/Burst/Fsk
In connector This signal can be used as external signal source in Sweep,
Burst and FSK mode.
⑦ Ref Clk/Counter In
connector To accept an external clock signal, or to accept the input
signal of counter. (See page 38, To Set the Counter)
⑧ Ref Clk Out
connector To synchronize generators. Output a clock signal generated
by the crystal inside the generator. (See page 38, To Set the
Clock Source)
User Interface
④
⑨
⑧
③
⑦
② ①
⑥ ⑤
⑩
⑪
Figure 4-3 User interface (take Sine for instance)
① Current channel
② Parameter 1, display parameter and edit the focused parameter
③ Current signal type or mode
④ The setting menu of current signal or mode