Posiflex JIVA HS-2310 - Manual (Page 8)

Part 8
Step B: Connect to the following ports where necessary.
Connecting to Ports on the Bottom Rear I/O Plate
For suitable connection on the bottom rear I/O plate, essentially doing
connection properly as illustrated below:
Step A: Face the rear side of machine toward user then locate the bottom rear
I/O plate as illustrated below:
Step B: Find the ports necessary for proper connection in addition to doing DC
IN cabling connection.
CAUTION: On doing any insertion or extraction of any connector, please
always hold the connector head itself instead of pulling on the
cable wire. Failure to do this could damage the cable and
jack that is considered as an artificial destruction and is not
covered by the warranty.