Q-See QC40198 - Manual (Page 120)

WEB OPERATION
QC40198 User Manual
111 | P a g e
Abnormity
The abnormity interface is shown below. See Figure 7-56.
Figure 7-56
Please refer to the following chart for detailed information.
Parameter Function
Event
Type  The abnormal events include: no disk, no space, disk error, net error.
 You need to put a checkmark to enable this function.(Multiple choices)
Normal
Out The corresponding alarm activates output channel when alarm occurs,
There are three channels.
Latch The alarm output can delay for the specified time after alarm stops.
Then system disables alarm and corresponding activation output.
The value ranges from 10s to 300s.
Send
email If you enable this function, system can send out email to alert the
specified user.
Alarm
upload System can upload the alarm signal to the network (including the alarm
centre.)
Show
message System can display alarm information in local combo DVR screen.