Q-See QC40198 - Manual (Page 65)

MAIN MENU
QC40198 User Manual
56 | P a g e
 Auto gets DNS address
Please enable DHCP function first and then double click DNS item.
If the DHCP function is enabled successfully, system can get the DNS server IP address. See Figure 5-17.
Figure 5-17
FTP
You need to download or buy a FTP service tool (such as Ser-U FTP SERVER) to establish FTP service.
Install Ser-U FTP SERVER first. From “start” -> “program” -> Serv-U FTP Server -> Serv-U Administator. Now you
can set user password and FTP folder. Please note you need to grant write rights to FTP upload user. See Figure
5-18.
Figure 5-18
You can use a PC or FTP login tool to test to see if setup is right or not.
For example, you can login user ZHY to
FTP://10.10.7.7 and then test if user can modify or delete folder or not.
See Figure 5-19.
First, enable DHCP
function here.
Then select
DNS item
here.