Q-See QC40198 - Manual (Page 98)

WEB OPERATION
QC40198 User Manual
89 | P a g e
Encode
Encode interface is shown in Figure 7-32.
Figure 7-32
Figure 7-33
Please refer to the following chart for detailed information.
Parameter Function
Channel
Here you can select a monitor channel.
Channel Name Displays current channel name. You can modify it.
Compression H.264
Main Stream Includes main stream, motion stream and alarm stream. You can
select different encode frame rates for different recorded events.
For example, you can use high frame rate to record important events,
record scheduled events in lower frame rate and it allows you to set
different frame rates for motion detection record and alarm record.
Extra Stream Select extra stream if you enabled the extension stream to monitor.