Q-See QC40198 - Manual (Page 57)

MAIN MENU
QC40198 User Manual
48 | P a g e
5.3.1 General
General setting includes the following items. See Figure 5-3.
Figure 5-3
 System time: Here is where you set system time
 Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY.
 Date separator: There are three options to separate date: dot, beeline and solidus.
 DST: Here you can set DST time and date. Enable DST function and then click set button. You will see an
interface shown in Figure 5-4.
Figure 5-4
Here you can set start time and end time by setting corresponding week setup. In Figure 5-4, enable date button,
you can see the interface shown in Figure 5-5. Here you can set start time and end time by setting corresponding
date setup.
Figure 5-5
 Time format: There are two types: 24-hour mode or 12-hour mode.