DoorKing 6500 - Manual (Page 22)

20
6500-065-K-7-08
2.7 Main Terminal Description
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
1. LOW VOLTAGE COMMON
2. RADIO RELAY (SINGLE BUTTON)
ACTIVATION
3. 24 VAC Radio Receiver Power Only
(250 ma. maximum)
4. SINGLE BUTTON ACTIVATION INPUT/
OPEN LOOP LOGIC OUTPUT
5. SINGLE BUTTON ACTIVATION
6. REVERSE (SAFETY) INPUT/
SHADOW INPUT
7. GATE TRACKER DATA
8. GATE TRACKER BUSY
9. MAGNETIC LOCK OUTPUT
10. DRY RELAY CONTACT
11. DRY RELAY CONTACT
12. LOW VOLTAGE COMMON
13. LOW VOLTAGE COMMON
14. ALARM
15. ALARM RESET
16. SECONDARY OPERATOR
CURRENT
SENSOR
17. MOTOR
18. MOTOR
19. 115 VAC HOT
20. 115 VAC NEUTRAL
• lf SW 1, switch 3 is ON,
this input is identical to
Single Button Activation.
• lf SW 1, switch 3 is OFF,
this terminal becomes the
logic output of the OPEN
loop detector.
• 24-volt DC magnetic lock power
is provided constantly except when
the gate is opening or open.
• Operation of relay is dependent on
setting of SW 1, switches 7 and 8.
Relay contacts can be set for
Normally Open (NO) or Normally
Closed (NC) operation.
Contact
rating is 1 amp maximum at
24-volts DC.
• When gate is closed, input will open gate.
• When gate is open and auto close
timer SW 1, switch 4 is turned on,
input will re-set and hold timer.
• When gate is open and auto close
timer SW 1, switch 4 is turned off,
input will close gate.
• When gate is closing, input will
reverse gate.
• When gate is closed, this input has no
affect on the gate operator.
• When gate is open and auto close
timer SW 1, switch 4 is turned ON,
input will re-set and hold timer.
• When gate is open and auto close
timer SW 1, switch 4 is turned OFF,
input will prevent gate from closing.
• When gate is closing, input will
reverse gate if SW 1, switch 5 is OFF.
• When gate is closing, input has no
affect on the gate operator if SW 1,
switch 5 is ON (set for shadow input).
1 ON
2
3
4
5
6
7
8
1 ON
2
3
4
5
6
7
8
1 ON
2
3
4
5
6
7
8
1 ON
2
3
4
5
6
7
8
1 ON
2
3
4
5
6
7
8
NC
NO
SW 1
SW 1
SW 1
SW 1
SW 1
10
9
6
5
4