Quantum Composers 9730 Series - Manual (Page 19)

8-19
PstTest: Enables or disables post resistance test and requirements
for the channel.
PstMeas: Displays the measured resistance from the last run post-test.
TstType: Sets the type of test for determining pass/fail condition of the
Post Test. The types are as follows:
Standard – Indicates “Ground Fault” if PstMeas is less than
PstMin and “Resistance Range Error” if above PstMax if
PstMax is enabled.
Outside
– Indicates “Resistance Range Error” if PstMeas is
between PstMin and PstMax.
Outside Pre
– Indicates “Resistance Range Error” if PstMeas
is between PreMin and PreMax.
PstMax: Sets the maximum resistance allowable to consider a post-
test as passed. (May be disabled by setting to 0 through the
command interface)
PstMin: Sets the minimum resistance allowable to consider a post-
test as passed.
IPstMax: Sets the maximum test current for measuring the resistance.