Ending a connection – Dell Axim X5 HC01U User Manual

Page 110

Advertising
background image

www

.dell.com | support.dell.com

110

Getting Connected

• If a network with a broadcast SSID is not detected, skip to

step 11.

10

Tap The Internet.

NOTE: If multiple networks are detected, tap the network to which

you want to connect, tap The Internet, and tap Connect.

11

Tap the Start button→ SettingsConnections tab→ Connections.

12

Tap the Wireless Ethernet icon.

13

On the Wireless tab, tap New Settings.

14

Enter the SSID next to Network Name, and tap The Internet.

15

Tap the Authentication tab to enable or disable WEP settings,

depending on your network type.

16

Tap OK.

17

Tap the connection icon,

,

that appears in the navigation bar.

18

Tap the name of your VPN connection to enable it.

Ending a Connection

To disconnect:

• When connected through dial-up or VPN, tap the Connection icon

on your navigation bar and tap End.

• When connected through a cable or cradle, detach your device from

the cable or cradle.

• When connected through the infrared sensor, move the device away

from the computer.

• When connected through a network (Ethernet) card, remove the

card from your device.

Advertising