Rena XPS-ProMail System User Manual
Page 36
SECTION 3
OPERATING THE SYSTEM
28
XPS-ProMail System Operations 4-24-14.doc
3. Click on the "Go to Preview Mode" icon
, located at the upper left-hand corner of the
Bulk Mailer 5 "designer" screen.
Tip: Click on the "Go to Designer Mode" icon
, to return to the "designer" screen.
4. Click on the printer icon
, to open the "Mail Print Setup" dialog box.
- Make sure the corresponding Rena Systems printer driver is selected as your "Printer:".
- Use the "Advance Settings..." button to select the desired print quality and or orientation.
- Use the features under "Print Range" to select the range of addresses you want to send to the printer.
5. Print.
When ready to print, make sure the printer is on-line, and then click on the "Print" button.
Please contact Satori Software (800-357-3020) or visit the Tech Notes area of their web site for
additional informati