Rena XPS-ProMail System - Manual (Page 48)

SECTION 4
MAINTENANCE
40
XPS-ProMail System Operations 4-24-14.doc
Cleaning
WARNING
THE XPS-ProMail 3.0/4.0 PRINTER IS A PRECISION MACHINE THAT SHOULD BE
CLEANED REGULARLY TO INSURE MANY YEARS OF SERVICE.
BEFORE PERFORMING ANY MAINTENANCE, DISCONNECT THE MACHINE FROM
ITS POWER SOURCE!
The XPS-ProMail System must be cleaned regularly of accumulated paper dust and ink.
Depending on the types of media that are run, the system may need to be cleaned daily or less
frequently.
The exterior of the machine may be cleaned with any standard household cleaner, which is non-
abrasive and does not contain plastic harming solvents.
The interior of the system should only be cleaned by a qualified service technician. Please
contact your Rena Systems dealer. Accumulated dust should be removed with a vacuum. In
addition, the vacuum pump filters and fans must be checked and cleaned.
CAUTION
NEVER SPRAY OR POUR CLEANERS DIRECTLY ON OR INTO THE XPS-
ProMail 3.0/4.0 PRINTER.
LIQUID CAN HARM ELECTRONIC PARTS.
ALWAYS DAMPEN A RAG WITH THE CLEANER AND APPLY IT TO THE
PARTS TO BE CLEANED.
Media Transport Belts
The media transport belts can become glazed with paper lint and ink from the media. They
should be regularly cleaned with a mild household cleaner on a damp cloth.
CAUTION! Rena Care should NOT be used to clean the Media Transport Belts on this system.
Media Transport Belts can be damaged by some chemicals and solvents. Avoid using all
solvents and untested chemicals on the Media Transport Belts.
WARNING
DO NOT REMOVE THE SIDE COVERS OF THE PRINTER!
THERE ARE HIGH VOLTAGES PRESENT BEHIND THE COVERS!