RGBLink VSP 5162PRO - Manual (Page 65)

5. Communication Software Guideline
Software Operation
VSP 5162PRO User Manual 65
Device IP
Users can set equipment IP, usually used when one computer control
many devices or remote control. It takes effect immediately after users
change IP through serial port; and when users change IP through network,
it takes effect after reopen the software.
Factory Setup
Click ―Factory Setup‖, previously saved user mode will be cleared.
Language
This software supports both Chinese and English, User can switch the
language by ―Language‖ option.
Admin
Advance Debug： User should input the password in the ―Admin
Password‖ dialog for advance debug.
Note
Advance is only done by engineer. If need,
please connect us for password.