RGBLink VSP 5162PRO - Manual (Page 81)

6. System Setup and Operation
How to Set up the PIP
VSP 5162PRO User Manual 81
How to Set up the PIP
Push the [PIP] button, the button led light turn on, and enter the PIP
function menu. Choose <PIP>, and set <ON> to enable the PIP function.
LAYOUT: Can choose PIP layout, the corresponding results are as follows:
PIP L+T PBP L+R PBP T+B
ALPHA: Can set the image transparency, the regulating range is among 0
to 128.
SWAP IMAGE: It can set PIP to swap exchange, when choose ON, it can
realize the IMAGE A and IMAGE B exchange.
SELECT: Can choose to set the size or position of IMAGE A or IMAGE B
individually.
—> PIP ON
LAYOUT PIP L+T
ALPHA 0
SWAP IMAGE OFF
—> SELECT PIP