Communication software guideline – RGBLink VSP 5162PRO User Manual
Page 67
Advertising
5. Communication Software Guideline
How to
Connect Windows Control Program by LAN Interface
VSP 5162PRO User Manual 67
How to Connect Windows Control Program by LAN
First, install the upper computer software in the computer.
Connect VSP 5162PRO and computer with cable, the connection diagram
is as follows:
Power on VSP 5162PRO, start the network function, specific steps are as
follows: MENU--SYSTEM -- ETHERNET -- NETWORK, select ON, and
check the IP address of the equipment, confirm if it is consistent with the
computer, such as 192.168.0.***, take 192.168.0.100 for example.
Open the upper computer software, click
, interface is shown as
follows:
Choose [Ethernet]:
Advertising