Do7010 – Seaward DO7010 User Manual
Page 26
3-11 Calibration access code:
Φ Select the PASSCODE line
Φ Press on the RIGHT arrow or on the enter key.
Φ Enter your previous calibration passcode with the UP, DOWN, RIGHT, LEFT
arrows.
Φ Enter the passcode with the Enter key
Φ Then enter your new passcode with the UP, DOWN, RIGHT, LEFT arrows.
Φ Enter the new passcode with the Enter key
3-12 DO7010 AUTOTEST:
ΒΑΤ:80%
DO7010
MANUAL
SEQU
TEST
SETUP
TRIGGER AUTO
DATE
29/03/04
TIME
12:13
LANG
FRA
MAINS
50HZ
VERSION VER 1.0
PASSCODE
>
CAL
department on +44 (0) 191 587 8739
To perform a unit calibration, please refer to the Calibration manual.
At anytime the DO7010 auto-test function allows checking of the measurement
accuracy.
Φ If you don’t remember your passcode , please call CROPICO’s service
From the power ON screen, press the TEST function key:
From the power ON screen only:
Operating Instructions
Digital Microhmmeter Type DO7010
24
•
•
•
•
•
•
•