Seaward DO7010 - Manual (Page 36)

If no Sequence file has been downloaded the following error message is displayed
«
NO SEQUENCE FILE LOADED ».
Φ After sequence file download, and from the initialisation menu, press on the
SEQU function key
5-1 Measurement protocol selection:
A sequence is made with several measurement protocols (or series). Each
measurement protocol describes a series of measurements to be performed with the
physical location or part number and test parameters (current, resistance threshold) for
every test points.
Φ Select the measurement protocol by setting in reverse video the line with UP
or DOWN arrows.
Φ Enter the selection with the Enter key.
MEASUREMENT SERIES:
BAT:95%
LEFT WING
ABCDE123456789
RIGHT WING
TAIL
ESC
BAT : 9%
DO7010
MANUAL SEQU TEST SETUP
Operating Instructions Digital Microhmmeter Type DO7010
34
•
•
•