Sundance SMT1026 - Manual (Page 25)

Notes: This function prepares the SMT351 for the acquisition.
ReadBack
Prototype: void ReadBack(void);
Parameters: None.
Return
value:
None.
Notes: This function starts the acquisition from the SMT351.
FillMem
Prototype: void FillMem(unsigned int *pBuf, unsigned int nBytes);
Parameters:
pBuf Buffer that contains the data to copy to the SMT351 memory.
nBytes Number of bytes to copy to the SMT351 memory.
Return
value:
None.
Notes: This function acquires data from the SMT351.
3.3.4 SMT381 interface
The SMT381 interface can be used with a SMT381 plugged a Sundance carrier board.
This section describes:
the SMT381 functions
•
ConfigureDACReg
•
ConfigureDACClock
•
SetTrigger
•
Reset
the SMT381 enumerated types
•
DATAMODE
The SMT381 functions
All the following functions can throw an SMTExc exception.