Sundance SMT1026 - Manual (Page 9)

// Open the SMT391 library
IFSmt391 *pSmt391 = Smt391Open(0);
pSmt391->ResetTIMs();
// Configure the FPGA
pSmt391->ConfigureFPGA(BITSTREAM, QUICK_CONF);
3.2 Functions exported by SmtFPGA.dll
This section describes each of the functions exported by SmtFPGA.dll. These functions
are described in the header file IFSmtFPGA.h.
•
SmtFPGAOpen
•
SmtFPGAClose
•
Smt350Open
•
Smt350Close
•
Smt351Open
•
Smt351Close
•
Smt370Open
•
Smt370Close
•
Smt384Open
•
Smt384Close
•
Smt390Open
•
Smt390Close
•
Smt391Open
•
Smt391Close
•
Smt941Open
• Smt941Close
The following functions can be used to get information about the carrier board.
•
SmtGetBoardCount
•
SmtGetBoardIndex
•
SmtGetBoardInfo
•
SmtGetError
Functions to access the interfaces
SmtFPGAOpen
Prototype: IFSmtFPGA * SmtFPGAOpen(unsigned int nIndex=0);
Parameters: nIndex
Index of the carrier board on which the FPGA-only module is
plugged in.
Return
value:
The return value is a pointer to an FPGA-only module interface.