Super Systems 9120 RPSC - Manual (Page 19)

Model 9120 Redundant Probe System - Color
4580 – Redundant Probe System – Color Page 19 of 23
Realtime – Selecting this option will set the chart back in realtime mode
Sample – This will set the sample rate of the chart. The options are:
30 Minutes
1 hour
2 hours
4 hours
8 hours
12 hours
1 day
2 days
7 days
ZOOM – This will allow the user to zoom in on a specific area of the chart. When in ZOOM mode, the
word “ZOOM” will be visible in the middle of the chart. The user can zoom by using the stylus or a finger
on the screen to create a box around the desired area of the chart. The zoom box will also display decimal
values for the low and high variables inside the box. It will also display the start and end time for the zoom
box itself. The zoom feature can be used as often as desired allowing the user to drill down on the variable
to show a specific value displayed on the screen. This is similar to the Zoom feature on SSi’s SD Recorder
application.
Note – When in ZOOM mode, the Restore button will become visible. Restore will
restore the chart to its original dimensions .
Note – This will allow the user to enter a note on the chart at the cursor’s location. The user can enter a
note either with a stylus or with the onscreen keyboard.
Note – When using the stylus, it is better to
move slowly. Moving quicker may not pick up the entire entered note . A note icon will be
displayed on the chart at the location of the note. Clicking on the icon will display the note.
Jump – the Jump feature allows the operator to select a date and time for variables to be displayed.
Choose a date from the calendar, then press the right or left arrow keys in the time display for the time
desired. Press OK to set the screen to the selected date and time.
Statistics - Choosing this option allows the operator to view statistics on any variable displayed on the
touch screen. The statistics are based on the screen image displayed whether looking at seven days of
data or zoomed in on a few minutes. The statistics will display:
Name of the trend line
Minimum value of the trend line
Maximum value of the trend line
The number of data points
The average value of the trend line
The standard deviation of the values
Exit – This will hide the chart menu.