Teac C-02 - Manual (Page 7)

7
En
gl
is
h
CAUTION
0 Avoid placing the unit in direct sunlight or close to any source of
heat, such as a radiator, heater, open fireplace or amplifier. Also
avoid locations that are subject to vibrations or exposed to exces-
sive dust, cold or moisture.
0 Place the unit in a stable location near the audio system that you
will use with it.
0 Do not move the unit during use.
0 Be careful to avoid injury when moving the unit due to its weight.
Have someone help you move it if necessary.
0 The voltage supplied to the unit should match the voltage printed
on the rear panel. If you are in any doubt regarding this matter,
consult an electrician.
0 Since the unit could become warm during operation, always
leave sufficient space around it for ventilation. When placing this
unit, position it so that it is at least 20 cm (8”) from walls and other
devices in order to allow good heat dissipation. When installing it
in a rack, leave at least 15 cm (6”) open above the unit and 10 cm
(4”) open behind it. DO NOT place anything, not even CDs, CD-Rs,
LP records or cassette tapes, on top of the unit.
0 Do not open the body of the unit as this might result in damage to
the circuitry or cause electric shock. If a foreign object should get
into the unit, contact your dealer or TEAC customer support.
0 When removing the power plug from the wall outlet, always pull
directly on the plug; never yank on the cord.
0 Depending on the electromagnetic waves of television broadcasts,
interference might appear on television screens when this unit is
on. This does not mean that this unit or the TV is malfunctioning. If
this occurs, turn this unit off.
Maintenance
If the surface of the unit gets dirty, wipe with a dry soft cloth. If it
becomes very dirty, dampen a soft cloth slightly with a diluted neu-
tral cleanser and remove any excess fluid from the cloth thoroughly
before wiping the unit.
Q For safety, disconnect the power cord from the
socket before cleaning.
0 Never spray liquid directly on this unit.
0 Do not use thinner or alcohol as they could damage the surface of
the unit.
0 Avoid allowing rubber or plastic materials to touch this product for
long periods of time, because they could damage the cabinet.