Teac K-05X - Manual (Page 18)

18
Selecting tracks
Searching forward/backward
During playback, press and hold a skip (.//) button on the
main unit or the remote control until searching forward/backward
starts. When you find the point where you want to listen, press the
play (y) button on the main unit or the play/pause (y/9) button
on the remote control.
You can change the forward/backward search speed by pressing the
skip (.//) button for at least one second and then releasing it.
The speed that the < or > blinks on the display also changes.
Low speed Medium speed High speed
Playback at normal speed
o Continuously holding the button down will not change the speed.
Skipping tracks
During playback, press a skip button (.//) on the main unit
or the remote control to skip to the previous or next track and start
playback.
o Press the . button once to return to the beginning of the cur-
rent track. Press the . button repeatedly to return to an earlier
track.
If the playback position is less than one second from the begin-
ning of the current track, however, pressing the . button will
skip to the beginning of the previous track.
o When stopped or paused, use the .// buttons to select a
track and pause at its beginning.
Display
During disc playback and when paused, each time the DISPLAY but-
ton is pressed, the information shown on the display changes as
follows.
Examples:
Track number of
currently playing track
Elapsed time of currently
playing track
c
Remaining time of currently playing track
c
Disc elapsed time
c
Disc remaining time
o When stopped, the total number of tracks and total playback time
of the disc are shown.
Example:
Total number of tracks Total disc playback time