Teac K-05X - Manual (Page 20)

20
You can program up to 30 tracks in the order that you want to listen
to them.
1
When stopped or during playback, press the REPEAT
button for at least two seconds.
If you press this button during playback, the currently playing
track will be added to the program as the first track.
Press for at least
2 seconds
2
Use number buttons to select tracks you want to
program.
Examples:
Track 3: 3
Track 12: +10 q 2
Track 20: +10 q +10 q 0
Programmed track number Program number
To program multiple tracks, continue pressing the number keys.
o Track numbers that do not exist on the currently loaded disc
cannot be added to the program.
Program playback
3
When you are done adding tracks to the program,
press the play/pause (y/9) button.
Program playback starts.
o If you created the program during playback, you do not need
to press the play/pause (y/9) button.
Adding tracks to the end of the program
When stopped or during playback, use the number buttons to select
the track you want to add.
Clearing the entire program and resum-
ing ordinary playback
When stopped or during playback, press the REPEAT button for at
least two seconds to end program mode. Press the REPEAT button
during program playback for at least two seconds to resume ordinary
playback from that point.
o The contents of the program will be cleared.
In addition, when stopped or during playback, if you press the tray
open/close (-) or main unit POWER button, the program contents
will also be cleared.