Teac CD-D11U - Manual (Page 12)

Front Panel
4 TASCAM CD-D11U User’s Manual
source drive disc tray: Insert the disc to be copied into the source drive. Use
the disc tray to load CDs into the drive. You can open the tray by pressing the
eject button (if the tray fails to open, you can use the emergency eject
mechanism). You can close the tray by pressing the eject button.
target drive disc tray: Insert a blank disc into the target drive to make a copy
of the source disc. You can open the tray by pressing the eject button (if the
tray fails to open, you can use the emergency eject mechanism). You can
close the tray by pressing the eject button.
power switch: Use the power switch to turn the power to the CD Duplicator
unit on and off.
LED power indicator: The LED power indicator will be continuously lit
when the CD Duplicator power is on .
Note: TASCAM strongly recommends that you do not push the tray in to
close it. Please press the eject button to eject or retract the tray.
Note: TASCAM strongly recommends that you do not push the tray in to
close it. Please press the eject button to eject or retract the tray.