Teac CD-D11U - Manual (Page 20)

9.6 Auto Verify
12 TASCAM CD-D11U User’s Manual
9.6 Auto Verify
This setting controls auto verification of discs after a copy process. The default
setting is
OFF .
9.7 Auto Compare
This setting controls auto-comparison of data between source and target discs
after a copy process. The default setting is
OFF .
9.8 Auto Prescan
This setting controls automatic prescan in the source disc whenever a data/audio
disc is inserted in the source drive. The default setting is
OFF .
9.9 Eject Disc
This setting controls the ejection of discs by the target drive. Three options are
available:
❑
Eject Good Only – This option ejects only successfully copied discs. This
is the default setting
❑
Eject All Disc – This option ejects successful and failed copied discs
❑
Do Not Eject – With this option, all discs remain in the target drive. Manual
ejection is required after every copy process.
9.10 Burn Mode
This setting controls three writing methods:
❑
Disc At Once (DAO)
❑
Track At Once (TAO)
❑
TAO Not Close
DAO is the default setting.
9.11 Display Time
This function displays the total time of each copy process. The default setting is
OFF .