Teac CD-D11U - Manual (Page 15)

Setup
TASCAM CD-D11U User’s Manual 7
Chapter 2. Using the CD Duplicator
This chapter explains the set up of the CD Duplicator, as well as basic operation
and menu function.
Setup
1. Carefully remove the CD Duplicator unit, AC power cord and user’s
manual from the shipping box.
2. Locate the CD Duplicator unit on a stable, flat surface.
3. Connect one end of the included power cable to the back of the CD
Duplicator. Connect the other end of the power cable to a three-prong
receptacle AC outlet.
4. Turn on the power to the CD Duplicator by pressing the power button
on the lower right-hand side of the unit.
During initialization, the CD Duplicator performs a self-test in which the
unit’s internal buffer is tested, source and target drives are detected, and the
LCD display is tested. Once the initialization is complete, the CD Duplicator
is ready for use.
The LCD displays the Copy function by default.
Figure 5. Copy Function on LCD Panel
Note: Please keep the original box and packaging materials in case of future
storage or transportation.
Caution: Do not attempt to bypass the grounding plug. Otherwise, you risk
damage to the unit and electrical shock.