Rear panel, Figure 4. rear panel of the cd duplicator unit – Teac CD-D11U User Manual
Page 13
Rear Panel
TASCAM CD-D11U User’s Manual
5
Rear Panel
Figure 4 illustrates the rear panel of the CD Duplicator unit.
Figure 4. Rear Panel of the CD Duplicator Unit
AC IN power connector:
Connect the included AC power cable to this input
connector. Plug the other end of the power cable into a three-prong receptacle
AC power outlet.
cooling fan:
Ball-bearing fan cools the CD Duplicator.
RCA output jacks:
Connect RCA phono plugs to these left and right stereo
output jacks. (The left channel is white; the right channel is red.) Connect the
other ends of the phono cables to an amplifier, powered speakers, or a
computer soundcard. A stereo audio signal will be output from the source
drive.
USB 2.0 port:
Connect an optional USB interface cable from this USB
connector to a USB 2.0 port on your computer. The CD Duplicator will
appear on your computer and function as an external CD-RW drive.
For more information, see Chapter 3, Function 10.11 “Stand Alone and USB
Modes” on page 15.
Caution:
Do not attempt to bypass the grounding plug. Otherwise, you
risk damage to the unit and electrical shock.
Note:
To ensure proper operation, use only the original AC power
cable with your TASCAM CD Duplicator unit.
AC IN power
connector
cooling fan
USB 2.0 port
RCA output
jacks