Teac DM-4800 Effect List - Manual (Page 11)

Effect parameter list
TASCAM DM-4800 Effect list
11
Parameter Indicator Range Description Remarks
Band 1 low-pass
filter frequency LoPass1
Freq 1.00 kHz - 10.00 kHz (1 cent steps) Specifies the low-pass
filter corner frequency. Band 1
Band 2
high-pass filter
frequency HiPass2
Freq 1.00 kHz - 10.00 kHz (1 cent steps) Specifies high-pass filter
corner frequency. Band 2
Band 2 low-pass
filter frequency LoPass2
Freq 1.00 kHz - 10.00 kHz (1 cent steps) Specifies low-pass filter
corner frequency. Band 2
Band 3
high-pass filter
frequency HiPass3
Freq 1.00 kHz - 10.00 kHz (1 cent steps) Specifies high-pass filter
corner frequency. Band 3
Band 3 low-pass
filter frequency LoPass3
Freq 1.00 kHz - 10.00 kHz (1 cent steps) Specifies low-pass filter
corner frequency. Band 3
MONO DELAY FX2.0
This mono delay enables you to set a delay time equal to twice the stereo delay time, and control vari-
ous parameters related to the envelope follower.
Table 1.7: Mono Delay parameters
Parameter Indicator Range Description Remarks
Delay time DelayTime 1 ms - 2700 ms (1 ms steps) Specifies delay time be-
fore initial echo begins.
Feedback delay
time FbkDlyTime Linked, 1 ms - 2700 ms (1 ms steps) Specifies delay time
after initial echo occurs. With Linked, all echoes
follow delay time pa-
rameter setting.
Feedback
amount Feedback
Amt 0% - 90% (1% steps) Specifies amount of
audio signal returned to
delay input.
Feedback phase
inversion InvertFbk Off, On Determines whether
or not feedback signal
phase will be inverted.
Low shelving
filter frequency LoShelfFreq 20.000 Hz - 20.00 kHz (6 cents steps) Specifies low shelving
filter frequency. This filter is applied to
feedback loops.
Low shelving
filter gain LoShelfGain –20.0 dB - 0.0 dB (0.1 dB steps) Specifies low shelving
filter gain. This filter is applied to
feedback loops.
High shelving
filter frequency HiShelfFreq 20.000 Hz - 20.00 kHz (6 cents steps) Specifies high shelving
filter frequency. This filter is applied to
feedback loops.
High shelving
filter gain HiShelfGain –20.0 dB - 0.0 dB (0.1 dB steps) Specifies high shelving
filter gain. This filter is applied to
feedback loops.
Wet signal
output pan Wet Pan 100%L - Center - 100%R (1% steps) Specifies pan for wet
(delayed) audio output.
Dry signal
output pan Dry Pan 100%L - Center - 100%R (1% steps) Specifies pan for dry
audio output.