Teac DM-4800 Effect List - Manual (Page 20)

Effect parameter list
0
TASCAM DM-4800 Effect list
Parameter Indicator Range Description Remarks
Crossover point X-over HIGH 20 Hz - 16 kHz Specifies crossover point
between mid and high
bands.
Pre-Delay
Initial reflection
level INILEV Off, –140 dB - 0.0 dB
(–140 dB - –60 dB: 5 dB steps;
–59 dB - –20 dB: 1 dB steps;
–19.9 dB - 0.0 dB: 0.1 dB steps) Specifies initial reflec-
tion level.
Reverb level REVLEV Off, –140 dB - 0.0 dB
(–140 dB - –60 dB: 5 dB steps;
–59 dB - –20 dB: 1 dB steps;
–19.9 dB - 0.0 dB: 0.1 dB steps) Specifies level of reverb
decay curve.
Initial reflection
pre-delay time IR DLY 0 ms - 160 ms (1 ms steps) Specifies delay time
until initial reflection
starts.
Reverb delay
time TAILDY 160 ms - 260 ms (1 ms steps) Specifies delay time
until reverb decay curve
starts.