Teac DM-4800 Effect List - Manual (Page 3)

TASCAM DM-4800 Effect list

Effect Parameter List
TASCAM FX2.0 Effect Parameters
MONO CHORUS FX2.0
This chorus effect features mono-in (one input) and
stereo-out (two outputs).
Table 1.1: Mono Chorus parameters
Parameter Indicator Range Description Remarks
LFO rate LFO Rate Freeze, 0.01 Hz - 30.00 Hz (0.01 Hz steps) Specifies LFO frequency.
LFO depth LFO Depth 0.0% - 100.0% (0.1% steps) Specifies LFO modula-
tion depth.
Pre-delay Pre-Delay 0 ms - 500 ms
(0 ms - 9.99 ms: 0.01 ms steps;
10 ms - 99 ms: 1 ms steps;
100 ms - 500 ms: 10 ms steps) Specifies time between
onset of original sound
and onset of the effect
sound. Using this parameter
enables you to make
interesting and detailed
settings based on subtle
changes due to phase
cancellation.
Feedback
amount Feedback
Amt 0% - 90% (1% steps) Specifies amount of
delay line output signal
returned to delay line
input.
Feedback
inversion InvertFbk Off, On Determines whether
or not feedback path
output signal will be
inverted.
LFO waveform
type LFO Type Off, Sine, Triangle, Sawtooth Up, Sawtooth
Down, Square Specifies LFO waveform
type.
LFO softening LFO Smooth 0.0% - 100.0% (0.1% steps) Specifies low-pass filter
coefficient applied to
LFO waveform. This parameter improves
unnatural sound at
discontinuous points by
smoothening out edges
of sawtooth or square
waveform.
Dry delay DryDly
(Thru 0) 0.0% - 100.0% (0.1% steps) Specifies delay of dry
signal that simulates
“through zero” flanging.
Low shelving
filter frequency LoShelfFreq 20.000 Hz - 20.00 kHz (6 cents steps) Specifies low shelving
filter corner frequency. This filter is applied to
feedback loops.
Low shelving
filter gain LoShelfGain –20.0 dB - 0.0 dB (0.1 dB steps) Specifies low shelving
filter gain. This filter is applied to
feedback loops.
High shelving
filter frequency HiShelfFreq 20.000 Hz - 20.00 kHz (6 cents steps) Specifies high shelving
filter corner frequency. This filter is applied to
feedback loops.
High shelving
filter gain HiShelfGain –20.0 dB - 0.0 dB (0.1 dB steps) Specifies high shelving
filter gain. This filter is applied to
feedback loops.
Effect parameter list