Teac DP-24 - Manual (Page 26)

26
TASCAM DP-24
3 – Names and Functions of Parts
p Color display
3.5-inch TFT LCD display with a resolution of 320x240
dots.
This display shows various types of information.
NOTE
The display is produced with extremely high-precision
manufacturing technologies. More than 99.99% of the
pixels operate to specification. Less than 0.01% of the
pixels may occasionally misfire or appear as red or black
dots.
This does not constitute a malfunction.
a GAIN (HIGH/MID/LOW) knobs
Use these knobs to adjust the equalizer gain.
s FREQ (HIGH/MID/LOW) knobs
Use these knobs to adjust the center frequency of the
equalizer.
d Q knob
Use this knob to adjust the MID bandwidth of the
equalizer.
f EQUALIZER ON/OFF button
Use this button to turn the equalizer on and off.
g JOG/DATA dial
When the Home screen is displayed, you can use this
dial to perform transport jog operations. (See "Jog
positioning" on page 55.)
Use this dial to change parameter values and select
items when using menus.
h ASSIGN button/indicator
Use this button to set (assign) the input (INPUT A to H)
for each track. When you press this button, the Assign
screen is displayed. The input signal of the assigned
input source becomes the recording source. (See
"Assigning inputs" on page 44.)
j MIXER button/indicator
Press this button to open the Mixer screen.
On this screen, you can adjust the settings for the
inputs (INPUT A to H) or tracks (including GROUP) that
are selected.
k DYNAMICS button/indicator
Pressing this button opens a screen to adjust the
settings for the effects applied to the inputs (INPUT A
to H).
l EFFECT button/indicator
Pressing this button opens a screen to make
adjustments in the effects.
; MENU button
Press this button to open the
MENU
screen.
z HOME button
Press this button to open the Home screen.
x F1 to F4 (Function) buttons
The functions of these buttons depend on the screen
currently displayed. The functions currently assigned
to the F1 to F4 buttons are shown at the bottom of
the screen.
c PAN knob
Use this knob to adjust the stereo position of the
track's playback signal or the input signal assigned to
that track. (See "Stereo position (panning)" on page
68.)
v SEND EFF 1/EFF 2 knobs
Use these knobs to adjust the output of the EFFECT
SENDS jacks.
You can also use the SEND EFF 1 knob to adjust the
internal effects.
b SEND MASTER 1/MASTER 2 knobs
Use these knobs to adjust the output of the EFFECT
SENDS jacks.
You can also use the SEND MASTER 1 knob to adjust
the internal effects.
n CURSOR (5/b/g/t) buttons
Use these buttons to move the cursor on the screen.
m JOG PLAY button
Press this button to switch to the Search mode.
, SOLO button/indicator
Press this button to switch to the Solo mode (the
button lights). (See "Solo" on page 48.)
. MUTE button/indicator
Press this button to switch to the Mute mode (the
button lights). (See "Muting tracks" on page 48.)
/ TRACK EDIT button
Press this button to open the
TRACK EDIT
screen.
(See "Track Editing" on page 60.)