Silence (erase part), Clone track (track duplication), Clean out (delete track) – Teac DP-24 User Manual
Page 63: 8 - track editing
TASCAM DP-24
63
8 - Track Editing
SILENCE (Erase Part)
IN
OUT
IN
OUT
This function cuts (deletes) the audio data between the IN
and OUT points on the selected track.
This is the same as leaving silence between the IN and
OUT points, as though there had been no recording.
This operation does not change the length of the track.
The following parameters are used in this operation.
TARGET Track
•
(
1
to
12
,
13/14
to
23/24
,
ALL
)
IN/OUT
•
TIP
You can use this function to delete short noises, for
example.
CLONE TRACK (Track Duplication)
Use this function to duplicate a single track or a stereo
track to a different track.
This copies the entire track, so the IN/OUT/TO points have
no effect.
The following parameters are used in this operation.
SOURCE Track
•
(
1
to
12
,
13/14
to
23/24
)
TARGET Track
•
NOTE
If you choose the same track for both
SOURCE Track
and
TARGET Track
,
Same Track
appears and the
operation cannot be executed.
CLEAN OUT (Delete Track)
Use this function to completely erase the selected track.
This deletes the entire track, so IN/OUT/TO points have no
effect.
The following parameters are used in this operation.
TARGET Track
•
(
1
to
12
,
13/14
to
23/24
,
ALL
)