Teac HS-P82 Addendum V1.20 - Manual (Page 3)

TASCAM HS-P82
3
HS-P82
New functions in firmware V1.10
Mirror recording function added
A mirror recording function has been added that allows you to
record simultaneously to 2 CF cards.
In order to make the mirror recording setting easy to see on the
screen, indicators have been added to the CF card remaining time
display button on the Home Screen. These indicators show the status
of both CF cards: recording possible, recording not possible, or not
ready for recording.
Home Screen during playback
ª Indicator meaning
Recording possible Recording not possible
Not ready for recording
ª Examples of CF card remaining recording time button
indicators
1 When set to
Single
When recording When not
recording When recording not
possible
1
2 When set to
Mirror
When recording When not recording
3 When set to
Mirror
/
Mirror
disabled 2
When recording When not recording When recording not
possible 1
Mirror recording settings
A
REC MODE
page has been added to the
REC SETUP
screen. This
page has a
REC Mode
item that has
Single
and
Mirror
buttons.
Single
: Recording can only be made to the currently selected
CF card (default setting).
Mirror
: 2 CF cards can be recorded to simultaneously.
NOTE
If the sampling frequency of the current project is 88.2, 96, 176.4 or
192 kHz, the
REC Mode
setting is always set to
Single
and cannot
be changed.
ª Setting button display
1 When set to
Single
2 When set to
Mirror
3 When set to
Mirror
/
Mirror
disabled
1) Conditions that make recording not possible
• Current CF card has no remaining capacity
• Current CF card not loaded
• Current CF card is not supported (PIO mode)
• Current CF card format is not supported (not FAT16 or
FAT32)
• If a take with the same name as set on the
NEXT TAKE
NAME
page and numbered 999 exists on either of the CF
cards (“---” appears in the take number area on the Home
Screen,
NEXT TAKE NAME
page)
• The total number of entries (files and folders) in the
current folders of both CF cards exceed the system limits
(CF card remaining time display button shows “
Rec
Limit
”)
2) Conditions that disable mirror recording
• Non-current CF card has no remaining capacity (recording
not possible if the current CF card has no open space 1 )
• Non-current CF card is not loaded (recording not possible
if the current CF card is not loaded 1 )
• Non-current CF card is not supported (PIO mode)
(recording not possible if the current CF card is not
supported
1 )
• Non-current CF card format is not supported (not FAT16 or
FAT32) (recording not possible if the current CF card is an
unsupported format
1 )
• One of the CF cards is not compatible with UDMA
• One of the CF cards has not been formatted by this unit
(not formatted with the cluster size recommended for this
unit)
• If any of the above conditions apply, mirror recording will
not occur, but recording to the current CF card will occur.