Teac HS-P82 Addendum V1.20 - Manual (Page 9)

TASCAM HS-P82
9
HS-P82
Firmware V1.02 new functions
Changing the term “scene” to “folder”
Until now, the level beneath projects had been called scenes, but
since now it is possible to change the names of takes freely after
recording, the term “scene” is no longer suitable.
For this reason, what had been called a “scene” before is now called a
“folder”. Buttons and screen references have also been changed. For
example, the
Folder Name
button and the
FOLDER NAME
screen.
However, the default folder name has not changed and is still
Scene
plus three digits.
• The
Folder Name
button (formerly, the
Scene Name
button)
and the
1st Folder
(formerly,
1st Scene
)
CREATE PROJECT screen 1
CREATE PROJECT screen 2
•
1st FOLDER
screen (formerly,
1st SCENE NAME
screen)
1st FOLDER screen
•
MAKE FOLDER
button (formerly,
MAKE SCENE
button)
Folder selection screen
•
MAKE FOLDER
screen (formerly,
MAKE SCENE
screen)
MAKE FOLDER screen
•
NUM OF FOLDER
(formerly,
NUM OF SCENE
) display
Project selection screen
In addition, when reading the Owners Manual, please replace the
term “scene” with the term “folder”.
Addition of project number, folder number and
take number indications
Numbers have been added to projects, folders and takes, and these
numbers are now displayed.
Project numbers are assigned to projects in the order that they are
saved on the media. Folder numbers are assigned in order as they
are created inside each project. Take numbers are assigned in order
as they are saved in a folder.
ª Take number display on the Home screen
The take number is now shown in front of (to the left of) the time
counter.
Home screen