Teac DR-10X - Manual (Page 21)

TASCAM DR-10X
21
Example: <time>23:59:59</time>
8 Sample notations
•
Example with all menu items
<dr10_syspara>
<mic_gain>low</mic_gain>
<low_cut>off</low_cut>
<limiter>off</limiter>
<auto_level>off</auto_level>
<dual_rec>off</dual_rec>
<time_track_inc>off</time_track_inc>
<auto_pwr_save>on</auto_pwr_save>
<file_name_type>date</file_name_type>
<file_name>DR0000</file_name>
<battery_type>alkali</battery_type>
<date>2014-08-27</date>
<time>23:59:59</time>
</dr10_syspara>
•
Example with only the time setting
<dr10_syspara>
<time>23:59:59</time>
</dr10_syspara>
Specifications
Ratings
8 Recording media
microSD card (64 MB−2 GB)
microSDHC card (4 GB−32 GB)
8 Recording/playback formats
48kHz/24-bit MONO WAV (BWF format)
Input/output ratings
8 Analog input
Mic jack
Connector
XLR JACK (female) (1: GND, 2: HOT, 3: COLD)
When MIC GAIN external input (EXT) selected (HOT pin unbalanced input)
Maximum input level: −8 dBu
Nominal input level: −24 dBu
When MIC GAIN mic input (LO/MID/HI) selected (balanced input)
Maximum input level: −31 dBu
Minimum input level: −63 dBu
Mic input gain
LO: +29 dB
MID: +35 dB
HI: +45 dB
Input impedance: 10 kΩ or more
8 Analog output
Headphones jack
Connector: 1/8” (3.5mm) stereo phone (dual mono audio output)
Audio performance
8 IN q PHONES (input monitoring output, 10kΩ load)
When MIC GAIN external input (EXT) selected (HOT pin unbalanced input)
Frequency response: 20 Hz – 22 kHz +1/−2 dB
Distortion: 0.05% (1kHz sine wave, at maximum input level)
S/N ratio: 92 dB or higher (PHONES volume max)
When MIC GAIN mic input (LO/MID/HI) selected (balanced input)
Frequency response: 20 Hz – 22 kHz +1/−2 dB
Distortion: 0.05% (1kHz sine wave, at maximum input level)
S/N ratio: 80 dB or higher (PHONES volume max, LO selected)