Teac DR-10X - Manual (Page 9)

TASCAM DR-10X
9
Names and functions of parts
Front
1 XLR connector
Connect this to a dynamic mic with an XLR
connector.
This can also be used as an external input. In
this case, it will be a HOT pin unbalanced input.
See the “Input/output ratings” on page 21
for input level specifications. (1: GND, 2: HOT, 3:
COLD)
2 Clamp nut
Use this to secure an XLR dynamic mic.
3 MENU button
i When the Home Screen is open, press the
MENU button to open the Menu Screen.
When the Menu Screen is open, press the
MENU button again to return to the Home
Screen.
i When a setting item is shown, press the MENU
button to return to the Menu Screen.
4 . [j] button
i During playback or when stopped in the
middle of a file, press the . [j] button to
return to the beginning of the file.
i Press when located at the beginning of a file
to skip to the beginning of the previous file.
Press and hold this button during playback to
search backward.
i When the Menu Screen is open, press the
. [j] button to open the Menu Screen.
i When a setting item is shown, press the .
[j] button to move the cursor left.
i When inputting a file name, use this to select
characters.
5 / [k] button
i During playback or when stopped in the
middle of a file, press the / [k] button to
skip to the beginning of the next file. Press and
hold this button during playback to search
forward.
i When the Menu Screen is open, press the
/ [k] button to select a menu item.
i When a setting item is shown, press the /
[k] button to move the cursor right.
i When inputting a file name, use this to select
characters.
6 7’9 [ENTER] button
i When the Home Screen is open, press the
7’9 [ENTER] button to start file playback.
i When the Menu Screen is open or a setting
item is shown, press the 7’9 [ENTER]
button to confirm the selected item. Use this
also to respond to a confirmation message.
7 Display
Shows a variety of information.
Rear
8 Battery compartment and cover
Install one AAA battery in this compartment to
power the unit.