Teac FW-1804 - Manual (Page 11)

TASCAM FW-1804
11
Monitor Mixing
Setting Input Levels
The FW-1804 can be very useful for recording live tracks
into a DAW application. Here's a typical scenario for
recording and overdubbing using the FW-1804:
1 Connect your analog and/or digital source(s) to the FW-
1804's inputs.
2 Access the monitor mixer's software interface.
3 Press the INPUTS key to monitor the inputs without
hearing your existing DAW tracks.
4 Adjust the channel's TRIM control (if it is an analog
input) or the digital source (if it is a digital input) until
the input meter in your DAW shows a level that is hot,
but not clipping.
5 Repeat this procedure for all active input channels.
Once you're done setting up levels, you can return to
COMPUTER monitor mode and begin recording.