Desa CD42M-A2 - Manual (Page 12)

www.desatech.com 111916-01F 12
5. Place log #5 (small front log) onto the front
left part of grate making sure notches fit over
prongs of grate (see Figure 22).
6. Place log #6 onto two pins on left side of back
and front logs (see Figure 22).
INSTALLATION
Continued
5
6
Figure 22 - Installing Logs #5 and #6
(CD36M-A Series Shown)
Model CD42M-A Series
1. Place log #1 (small base log) onto pin on left
side of grate extension (see Figure 23).
2. Rest left side of log #2 (front log) on top of
log #1 and right side onto pin located on right
side of grate extension (see Figure 24).
3. Place log #3 (rear log) onto pins on rear of
grate (see Figure 25).
4. Place log #4 (crossover log) onto pins from
both logs #2 and #3 (see Figure 26).
Figure 23 - Installing Log #1, Model
CD42M-A
Figure 24 - Installing Log #2, Model
CD42M-A
Figure 25 - Installing Log #3, Model
CD42M-A
1
1
2
3
Figure 26 - Installing Log #4, Model
CD42M-A
Figure 27 - Installing Log #5, Model
CD42M-A
Figure 28 - Installing Logs #6 and #7,
Model CD42M-A
5
6
7
4
5. Place log #5 (top log) onto right pin of front log
(#2) and smooth surface of rear log (#3). Make
sure it is seated properly (see Figure 27).
6. Place log #6 (left log) on left pin of front log
(#2) and smooth surface of rear log (#3). Make
sure it is seated properly (see Figure 28).
7. Place log #7 (right log) on right pin of top
log (#5). Make sure it is seated properly (see
Figure 28).