Teo UC Pro Server - Manual (Page 17)

Installation
13-280137 Rev. C Page 17
P P o o w w e e r r
The UC Pro Server is equipped with two redundant hot-swappable power supplies.
Connect the power connectors on the back panel to standard 120 VAC, 60 Hz power outlets
using the supplied IEC power cords.
If multiple circuits are available at the equipment site, connect each power cord to a
separate power circuit to ensure that the server will continue to operate if one circuit fails.
Your system is configured in the computer BIOS to automatically start when power is
connected. This setting ensures that the UC Pro Server will restart in the event of a
temporary loss of power.
To manually turn the UC Pro Server off or on, press the power button (page 7).